| Components | ||||
| 50-90 gpm Eductor Dispersor | ||||
| The Blue River 50 or 90 gpm Eductor Disperser will efficiently wet out and disperse up to 5 lbs per minute of dry polymer or similar dry product. The units are built from 304 Stainless Steel bodies with a Teflon nozzle at the powder inlet end. The nozzle is attached to a stainless steel bent tube (powder tube) that directs the powder down and into the Teflon nozzle. [more..] | ||||
| 3.0 Cubic Foot Hopper/Feeder Assembly | ||||
| The Blue River 3.0 Hopper/Feeder Assembly is designed to precisely meter out polymer from the hopper into a transfer chamber located directly under the feeder. The feeder utilizes a slotted rotor turned by an AC or DC driven gear motor. This arrangement provides a uniform and precise feed rate into the polymer conveyance stream. [more..] | ||||
| 6.0 Cubic Foot Hopper/Feeder Assembly | ||||
| The Blue River 6.0 Hopper/Feeder Assembly is designed to precisely meter out polymer from the hopper into a transfer chamber located directly under the feeder. The feeder utilizes a slotted rotor turned by an AC or DC driven gear motor. This arrangement provides a uniform and precise feed rate into the polymer conveyance stream. [more..] | ||||
| BRT Hydro-Mixer | ||||
| The Port-A-Poly polymer mixer utilizes a Blue River Technologies Hydro-Mixer as a primary mixing device. This mixer has a nozzle that has holes sized for the desired flow rate. Changes to the nozzle affects the mixing energy of the unit. For example if the holes are enlarged the mixing energy is reduced. [more..] | ||||